THC 24V Arc Voltage Plasma Torch Height Controller fr Plasma CNC Cutting Machine For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
THC 24V Arc Voltage Plasma Torch Height Controller fr Plasma CNC Cutting Machine:
$638.00
Instroduction:
This arc voltage plasma torch height controller supports almost all plasma cutters on the market like Thermal Dynamics, HD plasmas HPR130, 260, Ultra-cut series, etc.
Also, it supports all CNC cutting controllers on market, like Burny, industrial level controllers or Mach3, because it can start Auto Height control with or without Auto enable signal from CNC(but with Auto enable/disable signal from CNC, THC would work better).
No software needed.
Basic parameter:
-Input Power: AC24V±5%, 50Hz/60Hz
-Down/Up Motor: DC24V DC MOTOR
-Motor Drive: PWM
-Output Current: 1A-4A, Load capacity: 100W.
-Working temperature: -10 to 600C
-Voltage Divide ratio: 100:1
-Control accuracy: ±1V to ±3V
-Size: 320mm*260mm*90mm
-The speed of lifting: 1000mm/min to 4000mm/min.
Basic functions:
A. Auto Initial Height Sensing(IHS).
Torch Retaining Cap IHS and Proximity Switch IHS (NPN and PNP),
Proximity Switch IHS is backup for Torch Retaining Cap IHS for cutting dirty/rusty workpiece, anti-collision torch clamp needed(optional).
B. Torch Anti-Collision Function(requires to work with anti-collision torch clamp)
No matter it is on Auto Control Model or Manual Control Model, when torch head touches the workpiece, THC would automatically lift torch up to IHS height.
C. Freeze Auto Height Control on Corner Signal.
The controller can recognize Corner Signal from CNC and freeze Auto Control Model on receiving this signal, and we have a unique design to backup this function.
D. Lifting torch Up on IHS Disabled status.
On IHS Disabled status, jogging torch head down until it reaches workpiece, when Arc Starts, torch head would lift up automatically to the Set Height set via the button SET-IHS.
E. Lifting Torch Up on TURN ON or Arc Off.
When CNC is TURN ON or Plasma Arc Off, THC would lift torch up for 2 seconds, please notice this Function during commissioning, avoiding the possible damage of limit switch or lift device.
F. Set Pierce Delay Time.
Set Button Set-PIERE (set Pierce delay time), to delay output this signal, it is a switch signal, set to detect arc voltage lead in THC. Once THC detect arc lead in, it send arc ok signal to CNC to start cut.
G. Manual Operation.
Many functions can be manually operated on the operation panel, such as, set Auto/Manual mode of THC, manually control torch Up and Down, IHS test, Arc Start test,.etc.
H. Arc Voltage Divide.
Isolation Voltage Divide, the Voltage Divide ratio is 100:1/50:1. Once Isolation Voltage Divide function damaged, user can also use Non-isolation Voltage Divide on our voltage divider.
Wiring Diagram:
Other optional
Anti-collision function torch clamp(Not included)
Anti-collision function torch lifter(Not included)
Note: Your valid phone number is very important for the shipping,please provide it when you order!
Any customs duty applied to the parcel should be covered by the buyer.
As has been stated on the item description, Import duties, taxes and charges are not included in the item price and shipping charges.
These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
The product can be shipped by DHL or other Express, but a surcharge of US$50 will be applied on the shipment when your location is remote. Remote is defined as islands and highlands; or a post code/zip code that is difficult to serve; or a suburb/town that is distant, inaccessible or infrequently served.
Note: We are looking forward to a further extension of pleasant business relation. If you have any questions after receiving the goods or need something, please contact us,we will do our best to make you satisfied.
- 1X Arc Voltage Torch Height Controller Unit
- 1X Voltage Divider
- 1X Accessories(Connectors)
1.Item will be shipped within 3 business days of cleared payment via Post Airmail.
2.Only shipped to buyer\'s PayPal address, please confirm your address on PayPal before you offer.
3.Usually takes 7-20 business days to most Countries: US, Canada, UK, Australia and Europe.
4.Optionally, Express Shipments with tracking service via EMS/DHL/UPS with a quoted delivery time of 5 to 7 business days is also available .
Payment
- We ONLY accept Paypal.go to paypal account
- Any customs duty applied to the parcel should be covered by the buyer.
- eCheque will be held until cleared
- We appreciate prompt payment and look forward to your business in the future.Unpaid item will be filed without receiveing payment in 7 days from listing ended.
Warranty
- This item is ALL BRAND NEW and in the original factory box and packing,All products have been checked and packaged in good condition before dispatch.
- 12 months Manufacture\'s Warranty for defective items (excluding items damaged and/or misused after receipt)
- Defective items Must BE reported and returned to us within the warranty period(and the original package.).we will give you a return ID.Meanwhile Please tell us what the defect is,to eliminate improper use.
- Return shipping fee be responsible from buyer
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72
