BlackBerry Forums Support Community

BlackBerry Forums Support Community (http://www.blackberryforums.com/)
-   WiFi HotZone (http://www.blackberryforums.com/wifi-hotzone/)
-   -   HELP with using UMA on 8320! (http://www.blackberryforums.com/wifi-hotzone/97221-help-using-uma-8320-a.html)

benjilu 09-27-2007 02:18 AM

HELP with using UMA on 8320!
 
From reading the forums here, it was my understanding that without signing up for hotspot @ home, I can use the 8320's wi-fi to access UMA against my pool of minutes. When I connect to my home wireless router or any other open network, i can access via wi-fi but cannot make phone calls via uma. I don't even have the uma logo in upper right corner, does that logo appear automatically if i connect via wifi? right? Anyway, i believe i have a defective product and need to exchange, if anybody has any recommendations to certain settings, please advise.

flash24 09-27-2007 02:28 AM

did you fully restore your device? if so

Wipe your device, (options, security options, general settings, wipe handheld), then do an advance restore using your Desktop manager, (only restore your address book, phone logs, messages, saved emails, profiles etc.) do not restore any of the service book. Once your done, log into your BIS and then resend your service book.

kasperapd 09-27-2007 03:33 AM

And if all else fails, call T-Mobile and ask.

benjilu 09-27-2007 03:53 AM

thanks for the quick response flash! I did everything you said and it seemed to work for a second but then it went back to a faint wifi logo and cell antennae. Don't see uma logo anymore after it flashed for a second. I did notice that under diagnostics for wifi: uma wi-fi available is checked off but connection is crossed out, maybe i will try another wireless network and see. And I will not talk to anymore customer care reps or store reps, what they don't know is plain scary!!!!!!!!! I'm better off posting here and searching TIA

wayneholbrook 09-27-2007 05:38 AM

Quote:

Originally Posted by benjilu (Post 683446)
From reading the forums here, it was my understanding that without signing up for hotspot @ home, I can use the 8320's wi-fi to access UMA against my pool of minutes. When I connect to my home wireless router or any other open network, i can access via wi-fi but cannot make phone calls via uma. I don't even have the uma logo in upper right corner, does that logo appear automatically if i connect via wifi? right? Anyway, i believe i have a defective product and need to exchange, if anybody has any recommendations to certain settings, please advise.

Keep in mind that your minutes are free only when using at your home or any other t-mobile hot spot, not just any other open network.

mas90guru 09-27-2007 06:16 AM

Quote:

Originally Posted by wayneholbrook (Post 683505)
Keep in mind that your minutes are free only when using at your home or any other t-mobile hot spot, not just any other open network.

It's not always explicit on the T-Mo web site, however I believe ANY wifi call so long as you have the @Home plan is free (whether @Home or at a T-Mo hotspot).

See the link:

What is T-Mobile HotSpot @Home?

T-Mobile HotSpot @Home works as a home phone in your house and a mobile phone on the go–so now you can have just one phone with all of your favorite features. Use a T-Mobile HotSpot Phone (that provides mobile and Wi-Fi calling) along with a wireless router (T-Mobile offers specially designed routers for optimal in-home performance) to get great coverage at home. In addition, by adding the T-Mobile Hotspot @Home Add-On to their rate plan, customers will receive unlimited nationwide calls from any Wi-Fi or US T-Mobile HotSpot location.

T-Mobile HotSpot @Home – General Information

benjilu 09-27-2007 12:29 PM

Still not getting uma logo in corner. Under wifi diagnostic, I have wifi preferred and uma wifi available as being checked off in green but connection is crossed out with error code: W005.3 and the status: ISP error:retry. I was able to make a call with uma right after re-boot but call was dropped 30 seconds into it. I'm using an Airlink 101 wireless router, is that the problem? should i get tmo's router instead and try?

niteqwill 09-27-2007 01:33 PM

T-Mo has a UMA outage at the moment, maybe that is why.

NJBlackBerry 09-27-2007 01:35 PM

Quote:

Originally Posted by niteqwill (Post 684110)
T-Mo has a UMA outage at the moment, maybe that is why.

I agree....

flash24 09-27-2007 05:02 PM

Quote:

Originally Posted by niteqwill (Post 684110)
T-Mo has a UMA outage at the moment, maybe that is why.

I've had edge and uma since yesterday :cry:

slow 09-28-2007 08:28 AM

make sure you do a reset on your phone first. even though i have h@h on my plan, when i first got the phone, i was too excited to call CS to add the plan. i was able to get on UMA with out issue. this is at home or any open wifi. i had a sim card error yesterday and after a reboot, my phone is behaving more or less the same as yours. i have wifi connection but, i am still on tmo network for voice. after pulling the battery for 1 minute per the faq, it is working like before again. so, pull your batt, leave it out for a while put it back in.

this is just my experience... btw, i think the outage is in CA only? i am on the east coast... i don't know of any UMA outages right now.

feel free to correct me. :)

disp350 09-28-2007 10:29 AM

UMA Related question
 
Earlier, I received an 8320 from out T-Mobile rep. I swapped the sim card from my Pearl into the 8320 and its working no problem. The first time I successfully connected to my router, it was showing a UMA connection. I tested it by turning off the EDGE signal and was able to send/receive calls and use the Internet. However, now I am just receiving a Wifi and Edge connection. The Wifi is great for the browser, but obviously I cant make calls. Do I need to add something on to my plan to access UMA? I am currently on an Enterprise plan that has unlimited data with about 350 devices on the BES.

Kurt M 09-28-2007 11:25 AM

One thing I noticed about UMA and uma. I have an older Linksys WRT55 that doesn't support QoS. I could only get uma on my 8320. I just upgraded to the Linksys router sold by T-Mobile for @Home. I now get UMA. I suspect that the difference is that you get UMA if you are on a router that supports QoS and uma if on a router that doesn't.

Can anyone confirm this?

TroyDBrown 09-28-2007 11:38 AM

Quote:

Originally Posted by Kurt M (Post 685494)
One thing I noticed about UMA and uma. I have an older Linksys WRT55 that doesn't support QoS. I could only get uma on my 8320. I just upgraded to the Linksys router sold by T-Mobile for @Home. I now get UMA. I suspect that the difference is that you get UMA if you are on a router that supports QoS and uma if on a router that doesn't.

Can anyone confirm this?

You can still get UMA without QoS support.

jenfavre 09-28-2007 05:31 PM

Quote:

Originally Posted by benjilu (Post 684015)
Still not getting uma logo in corner. Under wifi diagnostic, I have wifi preferred and uma wifi available as being checked off in green but connection is crossed out with error code: W005.3 and the status: ISP error:retry. I was able to make a call with uma right after re-boot but call was dropped 30 seconds into it. I'm using an Airlink 101 wireless router, is that the problem? should i get tmo's router instead and try?

I spent 2 hours on the phone with tmobile last night for this very issue. Went through 6 techs and was hung up on twice. I was not happy to say the least. The last tech tried to tell me there was an outage, but I was actually able to receive UMA off a neighbor's open wireless network, another friend's network, and tmobile hotspots. It was only when I switched to my own that I could not get UMA back.

At some point during the night, my neighbor's wireless must have been turned off and my curve switched to my own and UMA was back when I got up this morning. If there was an outage, I'm not sure how I was getting UMA off someone else's network at the time, but I'm just glad it's back.

sgtcasey 09-28-2007 08:07 PM

edit

jstodda79 09-28-2007 10:36 PM

This is a pretty easy answer.. If you were using a previous BB or other PDA device, it did not have UMA support. So when you transferred to the CURVE, the keystore and other things that you used in your backup, will take the UMA feature OFF the curve. There is a known issue about this and several ways around it. Easiest being to backup your phone. Wipe it via the security menu, then do a SELECTIVE backup via the advanced button on the BB software and restore everything exept those items that would affect the policy. I am not at work now, but will list them. ANY tmobile employee can get you a PDF of how to take care of that. I had the pearl and did the same thing. But now my UMA works like a charm with my WIFI at home. I dont pay for the free calls from home but my service is just as good as my wireless internet which has incredible coverage in my home. Both the browser and sms/mms will work through UMA. 'You can use the WIFI browser on any unsecured network, or a secured network if you know the security key. The UMA will also work with almost any WIFI network, you only pay for the feature if you want FREE CALLS when youre connected. Otherwise its main purpose is to increase reception. Ill post the pdf tomorrow with the workthrough. Any questions feel free to pin or PM me.

TeritaM 09-29-2007 10:29 AM

Ok so I followed all of these instructions to the letter and my UMA still isn't working. I'm not sure what other steps to take now. I did it right the first time, I switched devices instead of backup and restore, when it didn't work, I wiped the curve and didn't restore anything (just synced my contacts) and its still not working. I am at my wits end. I have seen the UMA in my screen for all of 6 minutes, but when I look on my wifi settings it is there big as day.

What else could I possibly be doing wrong?

zGuy 09-30-2007 04:37 PM

Quote:

Originally Posted by mas90guru (Post 683531)
It's not always explicit on the T-Mo web site, however I believe ANY wifi call so long as you have the @Home plan is free (whether @Home or at a T-Mo hotspot).

I think you are right!(y)

zGuy 09-30-2007 04:44 PM

Quote:

Originally Posted by disp350 (Post 685419)
Earlier, I received an 8320 from out T-Mobile rep. I swapped the sim card from my Pearl into the 8320 and its working no problem. The first time I successfully connected to my router, it was showing a UMA connection. I tested it by turning off the EDGE signal and was able to send/receive calls and use the Internet. However, now I am just receiving a Wifi and Edge connection. The Wifi is great for the browser, but obviously I cant make calls. Do I need to add something on to my plan to access UMA? I am currently on an Enterprise plan that has unlimited data with about 350 devices on the BES.

To be able to make phone calls via wi-fi you must have T-Mo's h@h plan (currently $9.99 a month).

sgtcasey 09-30-2007 04:53 PM

edit

zGuy 09-30-2007 05:01 PM

Quote:

Originally Posted by sgtcasey (Post 687730)
You do not need the plan to simply make calls over a wireless Internet connection.
Dave

I couldn't make *any* call via wi-fi. None! Calls I made dropped after two seconds or so. Only with h@H that I am able to call. My situation might be unique but that's my story and I am sticking with it ;-)

sgtcasey 09-30-2007 05:05 PM

edit

John Clark 09-30-2007 05:34 PM

Quote:

Originally Posted by zGuy (Post 687737)
I couldn't make *any* call via wi-fi. None! Calls I made dropped after two seconds or so. Only with h@H that I am able to call. My situation might be unique but that's my story and I am sticking with it ;-)

That most likely has more to do with your router than with the BB or the UMA service.

aligeof 10-01-2007 10:58 PM

I think itxxx8217;s the old Root Certificate and Trust Certificate. Go to help (the yellow?) on the device and go to the BlackBerry HELP! website. The first link is xxx8220;HotSpot @ home (UMA) not working on my BlackBerry Curve 8320xxx8221; follow that link and download new Root Certificate and Trust Certificate. If you used the device switch tool, of did a backup and restore of an older device then old Certificate were copped to the new device.

zGuy 10-02-2007 05:21 PM

Quote:

Originally Posted by John Clark (Post 687759)
That most likely has more to do with your router than with the BB or the UMA service.

I agree. There's a thread related for those of us using the (Apple's) Airport Extreme "n" router. Stay tuned...
http://www.blackberryforums.com/wifi...extreme-n.html

jchin 10-03-2007 06:52 PM

Quote:

Originally Posted by aligeof (Post 689501)
I think it’s the old Root Certificate and Trust Certificate. Go to help (the yellow?) on the device and go to the BlackBerry HELP! website. The first link is “HotSpot @ home (UMA) not working on my BlackBerry Curve 8320” follow that link and download new Root Certificate and Trust Certificate. If you used the device switch tool, of did a backup and restore of an older device then old Certificate were copped to the new device.

That is exactly what I did after I "transferred my settings" from my 7100t to the Curve 8320. After the certificates were installed, I had to power cycle it completely (battery out and back in). Then the "UMA" showed up and I am now able to make and receive calls via WiFI (the T-Mobile GSM/GPRS/EDGE signal by my house sucks, only 1 bar 90% of the time). So now via WiFI it is great!

mak618 10-15-2007 07:09 PM

Quote:

Originally Posted by wayneholbrook (Post 683505)
Keep in mind that your minutes are free only when using at your home or any other t-mobile hot spot, not just any other open network.

No .. they are free if you have the hotspot@home plan and then u can be on any wi-fi network. if you dont have the hotspot@home plan then they will free as per your monthly plan .. eg .nights and weekends in most cases

shyguy122577 10-17-2007 07:32 PM

Installing the certificates worked for me as well. Thank you

rtst31975 10-20-2007 08:14 PM

Quote:

Originally Posted by wayneholbrook (Post 683505)
Keep in mind that your minutes are free only when using at your home or any other t-mobile hot spot, not just any other open network.

Actually I believe it's any wifi. We just signed up and only had 104 minutes used on our monthly plan and had over 1000 minutes on wifi usage. Which means that all my calls are free at work which is just a hot spot for our work, not T-Mobile.

sgtcasey 10-21-2007 09:52 AM

edit

frank_m_ri 12-24-2007 07:25 PM

that is correct,
if you have the HotSpot @Home add on to your plan, any time you INITIATE a call on UMA those calls are unlimited.
it works in reverse too, if you initiate a call on the towers and walk in to your house, and switch over to UMA, that call will be billed how it was initiated... and it will come out of your bucket of mins.

you do not have to have the @home add on to your plan to utilize UMA, you will utilize your bucket of mins, but can still take advantage of the reception you get in your home / work's WIFI signal

pr0t0typ3 01-20-2008 02:17 AM

Options>Set Up WiF>Next>Scan for Networks>Find Network>Connect>Next>Wi-Fi Hotspot Login..........Blackberry Splash Screen "Your Blackberry Device is no connected to the Interent">Blackberry Menu Key>Close>Finish.........Your WiFi Cloud becomes bold and UMA should appear....try it

Jocrad 02-02-2008 05:16 PM

New to BB - Curve 8320 WiFi issues!
 
Ok, I must be a blonde when it comes to my new Blackberry Curve 8320. Have the same problems as I've read above and on various other threads.... can't seem to connect to the wifi. The phone seems to recognise the BT home hub that I am using, but the little icon in the Manage connections bit is still yellow with a line through.
I have tried the full wipe then selective restore.... still no change, although I am getting EDGE intermittantly (more off than on)
Can anyone recommend anything?
On the whole, the 8320 works fine, I get my emails (I think via GPRS?) and it does all i need it to, I'm not a heavy internet browser on the blackberry (I'm on Orange and really dont want to run over my 6mb target) and I'm generally happy with it.... but I feel like its got more capability and if I could sort out the WIFI i'd like to browse more and save my orange data for when I have no other choice. Does that make sense?????
Jo :?

renigade 02-25-2008 09:15 AM

Hi, can anyone help me?

I have an 8320 which was from orange UK, I have since had it unlocked and am using my T-Mobile UK Sim card in it which is on web and walk and have the Blackberry data plan enabled.

I am able to use wi-fi for internet and for emails but I have never had UMA on my phone?
when I check my wifi diagnostic it says UMA wi-fi Available with a green tick next to it but has a red cross for connection? Error status is problem with ISP or T-Mobile network?
Can anyone help me? Do I need to do anything to my router? I am using the BT Home Hub.

Thanks

BR14 05-25-2008 05:27 PM

Not sure if this is relevant to the UMA problem. Since UMA is a form of IP tunneling, is it possible the router/firewall is not set up to accept packets via the port used for UMA?

Might explain why some routers work and others don't.

John Clark 05-25-2008 07:04 PM

Quote:

Originally Posted by renigade (Post 849309)
Hi, can anyone help me?

I have an 8320 which was from orange UK, I have since had it unlocked and am using my T-Mobile UK Sim card in it which is on web and walk and have the Blackberry data plan enabled.

I am able to use wi-fi for internet and for emails but I have never had UMA on my phone?
when I check my wifi diagnostic it says UMA wi-fi Available with a green tick next to it but has a red cross for connection? Error status is problem with ISP or T-Mobile network?
Can anyone help me? Do I need to do anything to my router? I am using the BT Home Hub.

Thanks

You can't get UMA on a provider's network while using another provider's branded BB. It just won't work. Wifi should work but you'll never see UMA.

Jeff Koncius 08-22-2008 05:54 PM

One Way Audio on Home Network with FIOS
 
OK, this is driving me crazy and having me waste a lot of time. First, let me say that UMA works fine outside of my house. However, at home I have Verizon FIOS with an Actiontec MI424-WR router and people I call from home while on UMA can hear me talking but I cannot hear them. I first spent almost 2 hours on the phone with TMo and got nowhere other than their changing the channel on my router. I then spent about 30 minutes with a helpful FIOS tech who went through many steps with me all to no avail. I then called back TMo and they suggested that I get their Linksys H@H router and bridge it to the Actiontec. Did that--I got the Linksys WRT54G-TM H@H router, bridged it onto my Actiontec and no change--still one way audio. I then spent about 2.5 hours on the phone last Saturday with upper level H@H support who then got an upper level person at Actiontec on the line. After fooling with various settings, the end result was no solution. The TMo guy was intent on having the Linksys act as the router but we could not do that because I have FIOS over coax. Further, the Actiontec guy--in response to the TMo guy asking how to get the Actiontec to just pass through the FIOS data without filtering it (if that makes any sense)--said that Verizon disables a setting which would allow complete pass through of the FIOS signal to the Linksys router which further prevented my being able to use the service. The TMo guy also mentioned that he has been able to do that type of work around in TX but for whatever reason, the CA Actiontec router cannot be adjusted that way. So, the TMo guy said that the bottom line solution is for my coax to be replaced with ethernet and then to get rid of the Actiontec altogether. Can this be correct? There must be a setting somewhere that is preventing me from hearing people at home--especially since UMA works fine outside of my house proving to me that it is a router set up issue, no? AHHHH!

monkeypaw 08-22-2008 09:00 PM

Quote:

Originally Posted by Jeff Koncius (Post 1071223)
OK, this is driving me crazy and having me waste a lot of time. First, let me say that UMA works fine outside of my house. However, at home I have Verizon FIOS with an Actiontec MI424-WR router and people I call from home while on UMA can hear me talking but I cannot hear them. I first spent almost 2 hours on the phone with TMo and got nowhere other than their changing the channel on my router. I then spent about 30 minutes with a helpful FIOS tech who went through many steps with me all to no avail. I then called back TMo and they suggested that I get their Linksys H@H router and bridge it to the Actiontec. Did that--I got the Linksys WRT54G-TM H@H router, bridged it onto my Actiontec and no change--still one way audio. I then spent about 2.5 hours on the phone last Saturday with upper level H@H support who then got an upper level person at Actiontec on the line. After fooling with various settings, the end result was no solution. The TMo guy was intent on having the Linksys act as the router but we could not do that because I have FIOS over coax. Further, the Actiontec guy--in response to the TMo guy asking how to get the Actiontec to just pass through the FIOS data without filtering it (if that makes any sense)--said that Verizon disables a setting which would allow complete pass through of the FIOS signal to the Linksys router which further prevented my being able to use the service. The TMo guy also mentioned that he has been able to do that type of work around in TX but for whatever reason, the CA Actiontec router cannot be adjusted that way. So, the TMo guy said that the bottom line solution is for my coax to be replaced with ethernet and then to get rid of the Actiontec altogether. Can this be correct? There must be a setting somewhere that is preventing me from hearing people at home--especially since UMA works fine outside of my house proving to me that it is a router set up issue, no? AHHHH!

I have Fios with an Actiontec router and mine works fine. I can get calls over the Actiontec wifi, but it is not really a reliable connection qualitywise so I have a Linksys attached.

There are settings in the Actiontec to prioritize the wifi, but the Linksys can also be prioritized. When I get a chance I'll see what I've got on my router. It actually didn't take more than one or two check boxes to get it to work ok. One annoying thing is I've prioritized my Paket8 VOIP box and my Curve so regular internet browsing is impacted. Links sometimes take 2 or 3 attempts to start loading. Downloading files also sometimes takes a few tries.

There is some way to port forward which I believe routes the connection straight through. But I don't understand how to get that done. I think the ports for Tmobile UMA are actuall a range which is why I've never been able to understand it. The help file at Actiontec walks through setting up a specific address.

monkeypaw 08-22-2008 09:43 PM

I checked and under Advanced Options, then Quality of Service on the left side you can prioritize the devices.

Another thing ocurred to me. The Verizon box where the fiber optics line comes to the building has a network connection in it. Mine is hooked up via coax coming from that box but it'll work via a network connection as well. I've considered plugging the Linksys straight into the box to see if it would connect but haven't gotten around to it. My guess it it wouldn't. But perhaps running a network cable to the Actiontec would be beter than coax.

Jeff Koncius 08-23-2008 12:54 AM

Actiontect Router Settings
 
Thanks--I see the entry under QOS but then what exactly did you change and input there? Also, I see that your OS is not the same as mine--did it work for you before upgrading it?

monkeypaw 08-23-2008 01:55 AM

2 Attachment(s)
Quote:

Originally Posted by Jeff Koncius (Post 1071502)
Thanks--I see the entry under QOS but then what exactly did you change and input there? Also, I see that your OS is not the same as mine--did it work for you before upgrading it?

In "All Devices" using "Add" I put the Linksys at Priority 6. In "Wireless Access Point Rules" I added the Blackberry also at Priority 6. I have my VOIP box also under the "All Devices".

Pics of what it looks like after it's saved. Nothing fancy and I think the settings could be improved, like destination address, if I knew what to put in there.

But anyway it works with those settings. I may have changed some others.

It did work with the OS that the phone came with, but not so well. 4.2.2.184 was the best 4.2 version I had and worked fine. The 4.5 ones seem to be better, but since .184 was working ok it's not really that much improved for me. I can use a bluetooth headset and UMA without problems.

Jeff Koncius 08-23-2008 06:33 PM

Actiontec Settings
 
Well, thanks for your screenshots and I adjusted my settings accordingly. I assumed you prioritized both input and output? Also, did you lower the firewall on the Actiontec? I did both--and still have no incoming sound. Not sure what to do at this point as it works fine away from the house. I am thinking router discus in light of the Olympic games but am open to other suggestions!

monkeypaw 08-24-2008 12:02 AM

Quote:

Originally Posted by Jeff Koncius (Post 1072351)
Well, thanks for your screenshots and I adjusted my settings accordingly. I assumed you prioritized both input and output? Also, did you lower the firewall on the Actiontec? I did both--and still have no incoming sound. Not sure what to do at this point as it works fine away from the house. I am thinking router discus in light of the Olympic games but am open to other suggestions!

Firewall on the Actiontec doesn't sound familiar. I didn't know it had one but that doesn't mean I didn't change something at some point. It was maybe 8 or 9 months ago that I first did some adjusting and I didn't log what I did. Just messed with things that seemed like they would matter.

On the prioritization, as far as I know I just set the one setting. No distinction on input or output.

One more thing to consider. WEP security seems to be the least problematic. Putting it on WPA or WPA2 (also called pre shared key in some places) used to give me problems. WEP is not great security wise but I'm not all that worried where I live.

Also check if there are other routers on the same channel nearby and other devices like 2.4 gz cordless phones. I use channel 3 and channel 8 since almost all my neighbors are on 1, 6, or 11.

Jeff Koncius 08-26-2008 11:41 PM

Still No Go
 
Changed the channels as you suggested and still no go. How much do you charge per hour for in home set up? I am very frustrated by this and now even more so since you are located in CA and I know it is not a statewide problem (meaning, some settings were disabled in the CA routers). Just not sure what to do at this point and loathe to spend any more money on this to get it to work. Thanks for your help though.

porsche928 02-19-2009 03:37 PM

USUALLY if you have problems hearing people pr they hearing you but not the other way around you are looking at either a bandwidth issue or, your router ROM needs to be updated.

porsche928 02-19-2009 03:38 PM

My Actiontec works fine.

dervari 02-21-2009 07:26 PM

Quote:

Originally Posted by zGuy (Post 687726)
To be able to make phone calls via wi-fi you must have T-Mo's h@h plan (currently $9.99 a month).

No, that's only for unlimited UMA calls. Without the plan the calls still count against your pool of minutes.

phrider 03-25-2009 11:50 AM

A handy thread for setting up routers:
http://www.blackberryforums.com/wifi...ports-qos.html

The key official Blackberry tech article says TCP/IP Ports 443, 500, 4101, and 4500 to cover UMA, BIS, and BES.
View Document

I just spent a bit of time looking for this, and figured I might save some of y'all some effort by adding to this sticky thread.

blair5304b@gmail.com 01-28-2010 09:38 PM

My 9700 Bold & her unwilling partner a netgear router?!?!?
 
I have a netgear router and a BlackBerry 9700 bold. It won't connect to the router. It does connect to other wifi. I can see a connection error in the dns settings. Any idea whats up here folks? Thank in advance...

BlairJames.....

kenosa 12-12-2013 10:32 AM

Quote:

Originally Posted by blair5304b@gmail.com (Post 1556133)
I have a netgear router and a BlackBerry 9700 bold. It won't connect to the router. It does connect to other wifi. I can see a connection error in the dns settings. Any idea whats up here folks? Thank in advance...

BlairJames.....

Posted via BlackBerryForums.com Mobile

dc/dc 12-12-2013 11:29 AM

Re: HELP with using UMA on 8320!
 
Quote:

Originally Posted by kenosa (Post 1810039)
Posted via BlackBerryForums.com Mobile

Bumping old threads is VERY rude.


All times are GMT -5. The time now is 06:24 AM.

Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.