1/2" NPT, 110V 120V AC Solenoid Valve Plastic Potable Water Normally Open N/O For Sale
1/2" NPT, 110V 120V AC Solenoid Valve Plastic Potable Water Normally Open N/O:
Valves4projects — supplying high quality valves since2004. Over 50,000 valve orders shipped.
EHCOTECH N21E-1/2-OC-120VAC-ES SOLENOID VALVE
1/2" NPT | 120-Volt ACEHCO-Smart Coil | BASF Ultramid® PA 66 Body / EPDM Diaphragm |Normally Open | 3 - 90 psi
EHCOTECH N21-Series solenoid valves are an affortable butamazingly robust and dependable choice for a variety of water,air, and other general purpose liquid applications. Media beingcontrolled must be compatible with Nylon 66, EPDM rubber, andStainless Steel (300 and 400 series). The N21-series valves aresemi-direct acting, making them suitable for many low differentialpressure applications where traditional, pilot operated, solenoidvalves may not perform reliably.The N21-Series uses an EHCO-Smart coil with an internal“hit-and-hold” circuitry. The EHCO-Smart coil drastically dropsthe “hold” voltage and amperage to maintain a lower coiltemperature for long coil life.
- 2-way, Normally Open (energize toclose, de-energize to open), unidirectional
- Fast acting
Port / Orifice Size
- 1/2" NPT (female) inlet / outletports
- Outer thread diameter / TPI (threads perinch): 0.840 inches / 14 TPI
- Internal orifice diameter: 1/2" or 15.0 mm
- Cv value: 4.8
Pressure and Temperature
- 3 to 90 psi or Vacuum
- Max media temp: 175° F (80° C)
- Water (including potable water)
- Inert Gases
- Other media compatible with valve materials
Coil / Electrical
- 120-Volt AC
- 22 Watt initial power draw; drops to 6 watts as soon as valve closes
- DIN Connector coil (DIN 43650)
- Allows installer to run their own wires orcable into the included connector
- Screw-down terminals inside the connectorfor wire connections
- DIN connector housing can be pointed up,down, left, or right
- Coil IP rating: 65
- NOTE: We also carry this valve in 12VDC, 24 VAC, 24VDC, and 220/240VAC voltages in our store
- Valve body: BASF Ultramid® PA 66(Nylon)
- Plunger and plunger guide tube: StainlessSteel (300 and 400 series)
- Diaphragm: EPDM
- Height: 4.5"
- Width: 2-5/8"
- Length: 3"
- If you are not completelysatisfied, please contact us and we will make it right!
- 12 month warranty
Copyright©Ehcotech InternationalInc. 2017
1/2" NPT Set of Hydraulic Flat Face Quick Coupler for Bobcat Skid Steer ISO16028
1/2" NPT Thread Flat Face Hydraulic Quick Coupler Set Bobcat Skid Steer ISO16028
1/2” G Thread (BSP) Female to 1/2” NPT Male Connector, Brass BSP to NPT Adapter