1/4" 12VDC NC Electric Solenoid Valve Push-In Connectors Quick Connect 12V For Sale


Buy Now

1/4" 12VDC NC Electric Solenoid Valve Push-In Connectors Quick Connect 12V:

EHCOTECH BBQC-CS2-12VDC 1/4" Push-In Connectors, Normally ClosedUntitled Document

Quality valves from a real company — buy with confidence.Best warranty and parts GENERATION MODEL RELEASED JULY 2016

Ships within 24 hours from San Diego, CaliforniaMultiple Shipping OptionsFree shipping


  • 1/4" PUSH-IN Connectors

  • Use with 1/4" OD tubing

  • Normally Closed (N/C)
  • 2-way / 2-position valve

  • Pilot operated diaphragm valve
  • 11/32" (8.5 mm) internal orifice

  • Coil / Electrical

  • 12-Volt DC / 500 mA
  • (24VDC/24VDC and 120VAC also available in ourstore - see categories on the left)

  • Pressure and Temperature

  • 3 to 115 PSI (0.2 to 8 BAR)

  • 175° F (80° C) Max Media Temp
  • Valve Materials

  • Nylon valve body

  • Stainless Steel internal components
  • EPDM diaphragm

  • Suitable Media

  • Water
  • Low Viscosity Fluids

  • Not recommend for Diesel or Gasoline

  • Dimensions

  • Height: 2-1/8"

  • Length:2-1/4"

  • Width:1-3/8"


    This is a great general purpose valve for water and other low viscosity fluid applications. These valves are suitable for potable (drinking) water, but do not have any 3rd party certifications such as NSF 61. All the "wet" components are made out of FDA listed materials.

    Like most diaphragm-type valves, this valve requires minimum pressure (3 psi) to open. It is intended to be used in pressurized systems, not in gravity feed systems. The pressure may come from city water pressure, pump etc.

    Many 1/4" valves have very small orifices (typically 1/8" or smaller). This valve has a large 11/32" (8.5 mm) orifice so any restriction in your system will be minimal.

    The Push-In connectors are designed for 1/4" OD (outside diameter) polyethylene tubing, often found in refrigerators etc. The connector will accept other semi-rigid or rigid tubing that has a 1/4" OD. Flexible hose will not seal.

    Attachment: The valve can be attached from the bottom with four #8 screws.


    The valve coil is nylon encapsulated and is water resistant (but may not be submerged).

    The coil is rated for continuous duty, which means that the coil temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves. If your application requires extremely long activation periods, please contact us for additional advise.


    We care about our customers. Please contact us if you need any help or tech support!


    We carry repair kits and coils for most of our valves. Please contact us for pricing and availability.


    Our warranty works without hassles. All replacements are quickly shipped from our warehouse in San Diego, California. You are responsible for the cost of shipping the defective item back to us; we gladly cover shipping cost back to you. If time is of essence, make sure to call us first. We understand that down-time can be expensive and we will do our best to work with you.Please note that diaphragms and coils are considered "wear and tear" items and are not typically covered by the warranty.


    If you are not happy with our products for any reason, you may return them for a full refund (excluding shipping charges) within 30 days of the purchase.


    We work with Original Equipment Manufacturers (OEMs) on regular basis. Please contact us for OEM pricing and/or large quantity discounts. _gsrx_vers_486 (GS 6.5.1 (486))

    Buy Now

    Related Items:


    1/4" 12VDC NC Electric Solenoid Valve Push-In Connectors Quick Connect 12V



    1/4" 12VDC Normally Open Electric Solenoid Valve Push-In Connector Quick Connect



    1/4" Solenoid Valve 3-WAY 12VDC, 12-volt DC inlet/outlet/exhaust air etc B30V


    Popular Forums