YONG HENG 4500PSI 30Mpa High Pressure PCP Air Compressor Pump Rifle Airgun Scuba For Sale

YONG HENG 4500PSI 30Mpa High Pressure PCP Air Compressor Pump Rifle Airgun Scuba
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

YONG HENG 4500PSI 30Mpa High Pressure PCP Air Compressor Pump Rifle Airgun Scuba:

  • Buy with confidence
  • Fast Delivery
  • Service & Support

Genuine YongHeng 30Mpa electric pump can be used for fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc.

About the item:

✅PCP electric air pump power: 110V 60HZ;Motor power: 1.8KW. Air pump inflating speed: 2800r/min; Work flow: 50L/min; Oil standard: IS0 VG 46 & AW 46. Notice: The temperature sensor is only compatible with AG13, 357A, CX157 and LR44W 1.5V batteries; batteries are NOT included and needs to be installed.
✅Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. WORKING WITHOUT WATER IS FORofferDEN!
✅Designed with two-stage compression and two water-oil separators for performance stability. It takes only 30 minutes to fill full 6.8L tank to 300BAR
✅PCP electric pump can be used for for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc.

Operation instruction:
1. Take out the product; install the hose at the air outlet.(Note: gasket is needed, or air leakage might exist.)
2. Connect 2 cold water pipes and connect them to the water pump. (Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using.)
3. Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose.The blow-down valve is installed at the
drain outlet of the first air chamber block.
4. Immerse the water pump in water and switch on the power.
5. Connect the container need to be inflated, make sure the connection is correct.
6. Screw up the screws of the blow-down valve and pressure relief valve.
7. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur.
8. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure
air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine.

1. Please use the power supply according to the parameter table.
2. If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause.
3. The product should be placed at a place that it couldn’ t be touched by children.
4. Please do not use it in moist and flammable place.
5. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.
6. Make sure the socket could withstand a currentgreater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.
7. Please do not touch the head section after the machine was just being used, so as to not beburnt by high temperature.
8. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely.
9. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder
temperature could be better controlled.
10. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.

  • Model : YH-QB01
  • Power Rating : 1.8KW
  • Inflating Speed : 2800R/Min
  • Noise : MAX 85DB
  • Air Flow Rate : 40-50L/MIN; 1.5-1.8CFM
  • Working Pressure : 100-300BAR; 1500-4500PSI
  • Cooling System : Water Cooling
  • Compression Stage : Two Stage
  • Lubrication Mode : Splash Type
  • Material of Cover : Cast Aluminum
  • Shout down : Manual stop
  • Pressure indicate : Gauge
  • Filtration : Water/oil separator
  • Lubricating oil : ISO VG46 or AW 46
  • Air hose connection : 8mm quick connect fitting
  • 1 x 30Mpa Electric Compressor Pump
  • 1 x Water Pump
  • 2 x Water Pipe
  • 1 x Hose Female
  • 1 x Air cock
  • 2 x Pressure relief screw
  • 1 x Wearing parts
  • 1 x English Manual
  • The product has you anticipated outstanding quality and convenience.
  • The product is equipped with high pressure rubber hose, to apply to multipurpose use.
  • Superimposed double-cylinder two-stage compression used by this product has the feature of large displacement, quick air inflation, which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles.
  • One machine serves several purpose, with a wide application range. A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for cars, motorbike, electric vehicles and other vehicles. Range of application For fire fighting, diving, leakage detecting, pressure-tight test, automobiles, etc.

1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave note if the changes are needed before we send the product.

2. It is beyond our ability to change the address after we ship your item.

3. Orders placed at weekend will be shipped within 2 days.

4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days.

5. We only ship to the 48 states, and we do not ship to FPO or APO addresses.


We accept returns. Please contact our customer service team immediately if:

1.You changed your mind and wish to request a return

2.Your product was damaged during transit

All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit.

We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.

We will require a picture of the damaged part for verification.

The buyer will be liable for the shipping costs associated with warranty claim.


We are the leading professional Megastore headquartered in America.

We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. On the odd occasion when things don't go to plan, you can be rest assured that our Customer Support team is here to help! Check out our warranty section for all terms and conditions.

We have a highly experienced engineering and technical team who specialise in researching and developing all our products.We benchmark our products against high standards and that¡¯s why our customers keep coming back. Even better, we offer a huge range of spare parts and service support after you purchase your product. So when you shop online with us you can buy with peace of mind.


We accept Paypal payment only.

Payment should be completed within 4 (Four) days of sale closing. Or unpaid dispute will be filed for closing sale.


For your peace of mind, this product comes with Lifetime warranty. We value our customers and wish to make your purchase experience as enjoyable as possible. If something goes wrong with your product, please do not hesitate to contact us for assistance.

Please contact us through and include the original purchase information (i.e. your name , address, email and purchase receipt number).

Buy Now

Related Items:

YONG HENG 4500PSI 30Mpa High Pressure PCP Air Compressor Pump Rifle Airgun Scuba picture

YONG HENG 4500PSI 30Mpa High Pressure PCP Air Compressor Pump Rifle Airgun Scuba


Yong Heng 30MPA 4500PSI High Pressure Air Compressor Auto Stop PCP Airgun Pump picture

Yong Heng 30MPA 4500PSI High Pressure Air Compressor Auto Stop PCP Airgun Pump


YONG HENG 30MPa 110V Air Compressor Pump PCP Electric 4500PSI High Pressure picture

YONG HENG 30MPa 110V Air Compressor Pump PCP Electric 4500PSI High Pressure


Popular Forums