Cases Cases Cases
What case (if any) are you using for your Torch?
|
Old 9700 case works. I think CrackBerry guys say the 8300 cases should work too. It doesn't put the Torch into standby correctly due to the magnet location.
|
My old Bold 9000 case. (y)
|
Bold 9700 Case fits like it was made for it! Except you dont have access to the USB/Charging port when it is in the case.
The 8900 and 8520 cases work to a liilte snug but works. |
Otter case bought at AT&T.
|
Bold 9000 case - magnet even turns off screen.
|
Quote:
|
My bold 9700 case fits perfectly. HOWEVER, does anyone else experience the phone being "unlocked automatically" in this case, my phone unlock itself and starts dialing random #'s from phone book after staying in this case for a while... :oops:
|
Quote:
The Torch is slightly shorter and narrower (width) than the Bold 9000. The Torch is also slightly thicker than the Bold 9000. Biggest difference is the width. So its a bit loose side to side on the Bold 9000 case. So fit is not "snug" but there is no way it will fall out either. Hope this helps. |
I bought the OtterBox and am using the Bold 9000 case to carry it. It is tight, but will loosen up a bit.
|
Bought the AGF Premium Leather case at the AT&T store. It fits snugly. Not sure whether to put it in the case screen out or in. Sometimes it presses on the screen because when I pull the phone out, the "connections" screen is open. It seems to work fine, though. FYI, on Crackberry.com they have mini to micro adapters for $9.95 so we can all keep our old chargers.
|
Quote:
|
Quote:
Posted via BlackBerryForums.com Mobile |
Would anyone recommend a case made specifically for the Torch? I can't seem to find one of those.
|
Using the Vzw 9650 Bold case...Fits perfect, like it was made for it.
Posted via BlackBerryForums.com Mobile |
I am also using my Bold 9000 case as the magnet will put the phone to sleep if the screen is facing the back. I have an Incipid feather ultra thin "case" on the Torch which adds about maybe 3mm to the width. I think it fits pretty well. Not snug, but not that much play either.
|
I bought the AGF GRT shell for the phone. I tend to like soft cases but none out yet and I can't imagine how they'd make one that will work with the sliding function of the phone. I don't like how the case makes the phone bigger than it actually is, but it'll do for now.
|
Sena 9700 Case?
Can anyone confirm if the Sena ultraslim case for the 9700 will fit the 9800 and activate the sleep function?
Thanks! |
Quote:
|
Probably going with a clear shield type protection if they don't come out with any TPU cases anytime soon.
|
From some of the other posts on the thread, the issue of "automatic unlock" once it's placed into a holster (in either BOLD or TOUR) might not be a holster incompetible issue, it could be the sensitive of the lock/unlock buttom needs to be adjusted by an software update.
Until someone makes a perfect fit holster, I don't think the problem can be fixed right now. For now, my Torch is out of a case just with a Zagg screen protector. |
Got the Otter box and I love it, really well made and that internal rubber protects it from shocks, you do have to get a screen protector thou because it doesn't have that. A bonus of this case is that it makes the key lock button sort of recessed which ends the problems with it getting pushed in your pocket.
|
I use the 9700 factory holster that was a bit worn from my old 9700. It works well for me.
i tried a 9000 factory holster and the magnet fails when screen it on outside. it need to be raised up about half inch to work. when placing scrren inside it works when magnet on flap is closed. YMMV |
RIM OEM leather holsters are coming soon. Go to the NA site and register for email update. The most recent update that I have heard is mid-September. Until then, I am using my 9700 cases for which the magnets do not line up, I know.
|
I am using my old 8310 belt holster case and it fits like a glove and the magnet works just fine with the screen pointed it, which I do anyway.
Posted via BlackBerryForums.com Mobile |
Do folks think case = holster?
When someone says "case" to me I'm thinking of something rubber or plastic that stays on the device. You put it on once and leave it on and the device can be used without removing the case. Whereas a holster is something you place the device in when not using it. Like holster with a belt clip. That's why you can use the older holsters with the 9800. But there are "cases" that force you to remove the device when you have to use it. Like the leather case that came with the 8300. Really it's a leather pouch. Just my 2 cents...:smile: |
Got the otter box tonight and it seems pretty good (it's the black and pink but I can blame that on my daughter). Amazon has the Splash Masque screen protectors (3-pack) for $11 with free shipping. They have good reviews for the iPod but not sure about the Torch.
|
Quote:
For the charging issue, duh, flip it upside down lolol. The magnetic strip still puts in stand by and resumes when it taken out. I've only tested this sitting at the computer, with the charger plugged in with the top of the phone put into the holster. As the case breaks in, I'm sure it will start to fit a lot more loosely. I'm wondering if padding could be added maybe? I've always LOVED the 9000 case- I've got through 3 of them with just my 9000 alone :D |
My OEM leather holster is arriving on Friday. No more 9700 case.
|
Are there any good glove type cases?
|
Quote:
|
Mine arrived today. The meaning of the red stitching...I never get tired of this...signifies that we, proud Torch owner, are part of the resistance against mindless appleheads, droid trolls, and all other non-BB spammers. If you are reading this message and you own a Torch, you are the resistance.
|
has anyone tried the agf grt slider case? from att
|
Quote:
|
Quote:
|
Quote:
ok... that's a bunch of BS !!!!! The otterbox website clearly states "comes with a screen protector". When I purchased my commuter series from AT&T and got home... no protector screen. I was pissed... lot of time spent traveling back n' forth. Called back and spoke to the guy who sold me the phone. "I'm sorry sir, it doesn't come with it".... OH REALLY???? ... road trip... back I went. Walked in the door and before I could go into dick mode, the sales rep said "sir, spoke to my manager and he said to give you two free screen protectors (I bought two cases)"... Good manager !! Long story short...AT&T is stealing from the customers. Otterbox sends them out with a screen protector and AT&T is taking it out, putting it in their own packaging and charging the customer additional funds if they want what they've technically already paid for !!!! ....jerks |
I too would like to know any reviews of cases such as "rubberized plastic cases" or "silicone cases?"
Might just end up getting the Otterbox ... but am hoping for something slimmer. Particularly am looking for: Cover possibly without blocking buttons but at the same time with coverage close by so that buttons (like the lock button) aren't pressed so easy, like in pocket. A feel that is not slippery nor clammy. The front case (for the slider) that is on sturdy -- won't chip off easy. Anyone have experience with cases (FOR THE TORCH) by, for example? Beyond Generic Accessory One KarenDeals Lux iNcido By the way, I bought the Amzer Luxe Soft Gel Skin Case for Torch -- am returning mine as the buttons are covered AND the places to press on the case to effect the buttons are so stiff that the buttons are not effected at all. |
FYI
So I bought the rubberized protector case made by a company called Beyond via Amazon -- not 100% perfect (occasionally the front piece will pop off when pulling from pocket, and the back part is not the easiest to take off) but generally am happy with it. Hopefully it will last (bought for $8.99). Amazon.com: Dark Purple Rubberized Protector Case for BlackBerry Torch 9800: Electronics |
Otter Box was no good for me.
I bought the otter box case, kept it for a few days but then my three year old got to my phone and the slide cover came off...He did not break it but it just made the poor kid break down in a fit...When I explained to him that the phone was OK he said "this no good daddy'. Needless to say I took it back and got the AGF GRT shell for the phone. To my satisfaction, I found that the slide cover actually slide into the bottom cover and was not clipping on the phone. Very nice case and the rep also gave me the none glossy screen protector when I told him the story of my son....I would recommend it...Does increase the girth of the phone but its the best that I have found thus far....Also came with two covers, one blue and the other looks just like the phone's orignal color.
Ohhh! got it from the ATT store.... |
I've been using the 9700 case for a few days but having unlock/random clicking issues, so I just ordered the OEM RIM case off of eBay - BlackBerry Torch 9800 OEM Leather Case Pouch Holster - eBay (item 310256393362 end time Oct-29-10 07:04:42 PDT) - $17 vs $40+ at shopblackberry.com
|
Quote:
puts it to sleep and makes all of the "in holster" setting work perfect!!! im heading to ebay to get me a brand new one |
The OEM case I just received is pretty daymn nice! red stitching and leather. ooo wee!
|
I had an otterbox case and returned it... the poor thing is naked for now. Every case I tried on it seemed to mess with my screen lock button. Has anyone else had this problem?
|
Nope, my Otterbox is great and it just saved my bacon. I accidentally dropped by 9800 (in the case) from the top bleacher at a baseball game onto the concrete floor. I saw it fall, fall, fall, faaaaallll, fall and then bounce on the corner and when I eventually retrieved it, not only was everything working but the case wasn't even scuffed.
|
I bought the otterbox initially but the part that goes on the sliding part of the phone broke after a week, went back to the at&t store and they said that was happening a lot and i got a 2-part case again but this one, the part that goes on the sliding part of the phone clicks on 2 rails coming out of the other part.
Very nice feel and it doesn't come off at all. Much better than the otterbox |
Quote:
|
The package has the AT&T logo and it is called AGF GRT SHELL, their oracle code is 75981, with it they should be able to show it to you, it is a better fit than the otterbox and $5 cheaper
This one has no belt holster. |
Quote:
So, the top piece attaches to a rail as part of the bottom piece, correct? How durable do you think this case is? Do you think after a fall that the rail or top part that attaches to the rail will get broken? What's the material like -- super sturdy? |
Quote:
|
I don't know if it will broke and when but the otterbox I had broke in my pocket. The cover of the sliding part attaches to it by a little plastic tab only so I went with this one instead.
Posted via BlackBerryForums.com Mobile |
....and, as I noted earlier in this thread, I bought Dark Purple Rubberized Protector Case for BlackBerry Torch 9800 by Beyond -- would have appeared to be a good buy, but aside from the top part occasionlly coming off, after just over a week, the top part where it attaches to the slider broke at two spots -- cheap plastic -- making it no longer attachable. Not recommended, even for $8.55 via amazon.com.
|
Quote:
|
Quote:
|
After waiting too long to get it I am very unhappy with the Otterbox. Even with a lot of fiddling with it, the phone acts screwy and locks up so that I have to do a battery pull. After several attempts (really wanted this to work) I gave up on it. Guess I will try something else....
|
I bought the 9800 case that Crackberry said buy, i bought it from Mobile Fun - Mobile Accessories, Bluetooth Headsets, SIM Free Mobiles, Ringtones, Games & more! - ordered it friday, was deliveryed saturday morning :)
|
Quote:
Posted via BlackBerryForums.com Mobile |
you mean you cant simply search the website yourself and find it, you want me to spoon feed it you? :( lol
|
I'm using the Seidio Innocase, after seeing the poor reviews on Otterbox I went back to Seidio. They worked well for my 8900 and I am using the screen protector and case for my Torch (y)
|
Posted via BlackBerryForums.com Mobile
|
I always had success with fortte flip cases and from the photos it seems like they have a good design for the torch.
Mine should arrive in a bit I'll keep you all posted. Posted via BlackBerryForums.com Mobile |
Quote:
BlackBerry Torch 9800 Cases |
Quote:
|
Quote:
Mobi Products Hard Shell Case for BlackBerry Torch 9800 - ShopCrackBerry |
Quote:
|
Quote:
|
Quote:
|
Crackberry online store has a BB Torch case. Just got mine, along with the dock station.
|
The thing with the cases for the torch is how do you attach the case to the sliding part of the phone.
i saw many cases but the only one that had a rail so the sliding part attaches itself to the fixed part. I did not see the Seidio Innocase for the torch but if it has the rail i'd switch tomorrow. |
case mate is the one dj boozy is talking about
|
I had, one of those snap on cases like the seido and it just broke on the slider part. I have the dock craddle so I have to take both parts of the case off everytime I want to charge or sync because it wont fit with the case on. So annoying...I think I have no real alternative to protecting the phone because there isn't a well made case that I can use and I hate to keep buying crap cases that will just break. There isnt much holding onto the phone and wears out and breaks quick.
Anybody have the same issues, suggestions or solutions?????? What is everyone using and with what charging methods? |
Quote:
Posted via BlackBerryForums.com Mobile |
Just got word my custom fortte case has shipped.. Went for a few extras so it was made special. From the pics on their site it seems to grab onto the bottom part so you can still slide the lcd touchscreen up after flipping the case open.
We'll see how secure it holds, and how convenient it will be with daily use but I've had great success with their cases and my 8700 so its worth a go for sure. Posted via BlackBerryForums.com Mobile |
All times are GMT -5. The time now is 12:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.