Totally disable alarm?
 

Is there a way to totally remove all the alarms? I put my device in the charger at home, put it in night mode, and somehow I will inadvertently turn on the alarm. When it was set for the default 6am it would wake me up, but since changed that to 12pm, but still hear it go off....it's annoying. Any way to get rid of it completely? Or some other thoughts apart from checking it after I take it out of night mode?

Re: Totally disable alarm?
 

I assume you are talking about the alarm clock.

I bedside mode you can enable or disable alerts as you choose.

An app alert is not an alarm. A set alarm will activate in bedside mode, or any time.

Disable the alarm if you are not using it. If you have set any alarms in calendar, delete if not using.
Posted via BlackBerryForums.com Mobile

Re: Totally disable alarm?
 

Alarms can be disabled in notifications but you need to be sure to read instructions for your phone and not turn off notifications you want.

this applies to BlackBerry Device Software 4.6 through 6.0

Turn on Bedside Mode

To turn on Bedside Mode in the Clock application on the BlackBerry smartphone, complete the following steps:
1.In the Clock application, press the Menu key.
2.Click Enable Bedside Mode.

Note: To turn off Bedside Mode, press the Escape key.


Set options for Bedside Mode

To set Bedside Mode options, complete the following steps:
1.In the Clock application, press the Menu key.
2.Click Options.
3.In the Bedside Mode section, perform any of the following actions:To disable LED notification when Bedside Mode is turned on, change the Disable LED field to Yes or place a chcek mark in the box.
To turn off the connection to the wireless network so the BlackBerry smartphone does not receive phone calls or messages while Bedside Mode is enabled, change the Disable Radio field to Yes or place a check mark in the box.
To dim the screen, place a check mark in the Dim Screen box.
To change the sound settings, under Sound Profile select the desired sound setting.

4.Press the Menu key.
5.Click Save.