10.4.11 & Missing Sync 1.0.2 anyone have it working with 8130 (VZW)?
Please Login to Remove!
I am unable to sync with my Pearl 8130 (Verizon Wireless) at all using Missing Sync 1.0.2. I get a spinning "Connecting to device" message, and then it just times out.
I am on Mac OS X 10.4.11, using a Powerbook G4. The Pearl mounts / unmounts fine in System Profiler, etc. The phone is connected directly to the Powerbook -- no USB hub involved. No combination of Calendar / Contacts / Notes / Preferences in the application seems to make any difference.
I've tried re-installing the app several times. Tried restarting with and without the phone connected. No difference. I've wasted hours on this.
I had PocketMac installed, but I uninstalled it using the uninstaller that came with it. (I also Spotlighted anything having to do with PocketMac and deleted that, for good measure.)
So I'm at a loss. Has anyone had any success with this?
I'm terribly disappointed with this software, and I don't recommend that anyone purchase it for use with the 8130 until these issues are explicitly stated as being fixed.
My latest error log before giving up:
--
Starting sync at 11/10/07 6:17 PM...
BlackberryUSBDevice::openUSBInterface
BlackberryUSBDevice::doInitialHandshake
BlackberryUSBDevice::writeMessage type=Echo (0)
Wrote 14 bytes to device (messageType = 0)
BlackberryUSBDevice::writeMessage type=Echo (0)
Wrote 14 bytes to device (messageType = 0)
Read 270 bytes from device
BlackberryUSBDevice::writeMessage type=Guid (1)
Wrote 14 bytes to device (messageType = 1)
Read 270 bytes from device
Deciding: 00
Read 32 bytes from device
Re-sending guid request
BlackberryUSBDevice::writeMessage type=Guid (1)
Wrote 14 bytes to device (messageType = 1)
Read 32 bytes from device
Got second read
BlackberryUSBDevice::writeMessage type=Device Info (2)
Wrote 14 bytes to device (messageType = 2)
Read 20 bytes from device
Got device with pin: 31-79-DC-E1
initializeDevice: sending message info
BlackberryUSBDevice::writeMessage type=Info (4)
Wrote 24 bytes to device (messageType = 4)
Read 26 bytes from device
BlackberryUSBDevice::writeMessage type=Reset (6)
Wrote 8 bytes to device (messageType = 6)
Read 10 bytes from device
BlackberryUSBDevice::writeMessage type=Info (4)
Wrote 24 bytes to device (messageType = 4)
Read 44 bytes from device
Prefix byte 2 is 8
BlackberryUSBDevice::writeMessage type=Handshake (5)
Wrote 8 bytes to device (messageType = 5)
Read 12 bytes from device
BlackberryUSBDevice::writeMessage type=Num Commands (7)
Num commands with prefix: 8
Wrote 10 bytes to device (messageType = 7)
Error reading from device (e0004051)
Error communicating with device: read number of commands acknowledgement failed.
BlackberryUSBDevice::doInitialHandshake failed
BlackberryUSBDevice: dealloc
BlackberryUSBDevice::closeDevice
BlackberryUSBDevice::writeMessage type=Close device (19)
Wrote 8 bytes to device (messageType = 19)
Error reading from device (e0004051)
Error closing device, reading message.
Synchronization cancelled due to error. Could not connect to device.
|