[AnthemAVM]

Help,

I am trying to wipe my 8800 on my XP computer. It tells me error Hresults 80040154 when I try to wipe.

Any ideas what I am doing wrong?

Michael

[jtsunami09876]

Originally Posted by Daily Interlude

This is exactly where I'm at. It shows PIN:Unknown but I can't get anything to connect (javaloader.exe or the DM). I have 2 blinks also and I know the PC is recognizing it somewhat because when I plug and unplug, the computer makes that USB connect/disconnect sound through the speakers so it's detecting something.

Also, my RIM used to have a code w/ one blink and then 3 blinks and then a long pause before repeating and it would not make the computer do the sound when plugging it up...but now it's getting 2 blinks so I assume something changed for the better (as at least the computer sees something now).

This 6230 was working fine. Started having issues having to reload from a back up one time and then it started messing up (don't recall exact details...it's been months since I've used it. I've only had it for a few months w/ only a month of it actually working...it's been a paper weight since! )


This is me to a "T" except I'm using a 6230:

I had this same problem, it wouldn't connect to device manager after I wiped it and showed PIN Unknown. I opened device manager and opened App loader, still said PIN unkown, but I clicked next and it Loaded ARM and erased and loaded OS(PS It didn't show Load ROM image or anything like usual). Then it said it couldn't connect after that, Then I opened up app loader again immediatly and it showed my PIN and I loaded OS sucessesfully. So it loaded something without the PIN unknown that caused it to be recongnized so I could load the OS.

[jtsunami09876]

Originally Posted by steinsoz

Hi all. Well this is a very useful forum, however I still cannot solve my problem hope you can help! I have a new T-Mobile Pearl, latest desktop manager, trying to install 4.2.1.96. The first install failed during the "trying to reconnect to JVM" step. So now I'm out here trying the JL_Cmder. Here's where I'm up to:

1. Desktop Manager not running
2. Blackberry restarted without the battery
3. Deleted vendor.xml
4. Connected via USB
5. Device Manager running, and it sees the BB as USB:PIN-FFFFFFFF
6. JL_Cmder never seems to find the BB, even with the -u command and a simple "dir" to see if its working
7. Application Loader Wizard starts, finds the BB at USB:PIN-FFFFFFFF
8. Application Loader presents the panel of software, I choose just the defaults for now
9. Updating Your Device panel appears
10. under "Load JVM and System Software", "Erasing Applications" appears to complete
11. under "Load JVM and System Software", "Loading System Software" appears to complete (ie. green bar crawls across to the end, then repeats rapidly)
12. under "Load JVM and System Software", "Waiting For Device initialization" appears to complete. During this process I hear a Windows USB device disconnected noise, followed by a connection noise, then a pause, then two connection noises in rapid succession
13. under "Load JVM and System Software", "Reconnecting to JVM" progress bar crawls across the screen, and then ends with an error panel
14. The error panel is titled "Unable to Complete the Loading Operation" and has this message: "Unable to reconnect to the device during a multi-stage load operation."

Woe is me ... please help ... thanks!

Tony

I just had this happen, after this happens immediatly open up app loader again, your PIN should be loaded and you can load the OS. Worked for me at least.

[IvoryAngel]

Everytime I try to load it blinks and then disappears?? am I doing something wrong?

I also tried the Command Prompt instructions and that is not working either

[claytona]

Hi, I am a noob. JL_Cmder looks like the right tool for what I need, if anything will work. I have a friend's 7100g att and have jvm error 102.

I have been reading/searching but haven't quite found the usage of this I need: I want to recover contacts and email to any PC readable file. Maybe then I can try wipe and reload but my friend has replaced it already so I just need the data.

I ran dir from command prompt and found 167 modules and I saw save switch but not sure how to use it. also I did not see any .cod files using dir cmd. Should I find/save those instead? not sure how to.

confused but willing. hum a few bars and I can probably follow along...

[John Clark]

Welcome to BBF!

JL_Cmder is the right tool. However, you are not going to be able to recover the data. It will revive the device, though, and allow you to reload the OS to the device.

[claytona]

does that mean contacts and email items in the directory list don't contain data? Is the data there and I would not be able to unencrypt? is there a different tool to try to retrieve any of this?

I would be willing to take a crack at the encryption if that's possible. I guess there might be an easier way in linux and I have a box but lack the experience to be effective with it. (that could change.)

thanks!

[John Clark]

There is nothing you can do.

[daniel83]

hello

is JL_Cmder working with 0S 4.5.44 ?
I would like to reset to factory with my 8310

thx

[transhorsa]

I want to learn how to use it

[mobiman]

Looks interesting, thanks

[monk2026]

thanks i needed this..

[glumpster]

i continue to be amazed at the incredible work people on this site are putting into their applications, then show incredible patience with the goons like myself who are trying to figure out what it's all about. The available hands to lift us to higher learning is awesome!

[d_fisher]

Originally Posted by daniel83

hello

is JL_Cmder working with 0S 4.5.44 ?
I would like to reset to factory with my 8310

thx

Yes JL_Cmder works with 4.5+.

[keifere]

I appreciate your efforts on creating this utility, thanks!

[peterjmc]

JL_Cmder worked great to fix my BB that had an IT Policy on it.

[DjNeoX]

thanx works great

[pugenio]

I'm trying to wipe my BB but after I type blackberry to confirm the wipe nothing happens. What am I doing wrong??

[keywestgirl]

I have been using javaloader for a couple of years and now suddenly, it won't recognize ANY devices. The cable seems fine because the DM sees everything just fine. I have a device that I need to remove the IT policies. I've tried 8310's, 8700c's, PEARL's and even an 8800 and javaloader won't connect to any of them.
Any ideas???

[JSanders]

Are you plugged directly to the PC USB port... not a hub?

Use a different PC?