[328iGuy]

Originally Posted by jmejonesnovo

Any way to do this over the air? I don't have access to a PC?

No as this is a firmware update, you need to do it from a PC.

[raynicolini]

Originally Posted by LokoTripper

Dude . . . been there done that , heck I even made a thread about having backup problems so here it is again . . .

If I can not backup my device , will the upgrade still go A ok ?? or is it a no no ?? can I do it with out first backing up everything ?? what would happen to all the stuff I have ?? will it be erased ?? can anybody help or clarify this for me ??

I do not want to brick my Bold , I know how to upgrade , I have done it a couple of times , I just need to know if not being able to backup , is an issue for upgrading , I will really really appreciate any help on this guys !!

I had the same problem, wouldn't let me back up, then i deleted all 3 caches from the browser setting, then the back up worked. Give that a try, hope it works

[gigantor]

I am wondering if anyone know of an OS that has Cantonese Input support? I installed the CSL version; however, there are no Cantonese Input support. Rogers previously had it on the Curve as part of its Chinese version Blackberry Code package; however, there is none on their website.

Any help will be great.

Thanks in advance.

[JosieGrossie]

Originally Posted by JosieGrossie

After being charged for a few hours, this issue seems to have fixed itself for now. We'll see how it goes throughout the day.

After 12 hours, the battery bars are full but my status says 90%

Anyone out there have an answer to this??

[didinu]

Guys,

Need your help with the url/link please. Thx

Originally Posted by CanadaBat

Just installed ver. 4.6.0.167 also, working great, seems that the actual response from the ball and clicks is much faster.

[aj178]

is arabic included in this version?

[akc786]

Originally Posted by aj178

is arabic included in this version?

Yes Arabic is included in .167

[aj178]

Originally Posted by akc786

Yes Arabic is included in .167

thanks alot mate

[PhYrE]

Rogers has the same software as well for those of you who want something more local.

h**ps://your.rogers.com/web_auth/downloads.asp?product=Wireless

Just click on the software for "Bold" and it starts downloading. Same versions.

-M

[terrytwn]

Anybody have this issue? I had upgraded to platform 4.0.0.155 (v4.6.0.162) and now I keep on getting dropped signal and it will not come back. I have to manually turn the radio off and then on again to grab any signal. What's worse is that it will be dropped again and stay signal-less until I turn it off and on again.

I will try the new platform and see if this will help but it did not happen with the version my unit came with.

Thanks.

***
My mistake! I already do have the updated version as listed in this post. So this is my problem with the updated OS. Anyone else have this problem?

[328iGuy]

Wirelessly posted

I have definitely never seen that on 162 here.

I have yet to have any issues at all, very pleased with this firmware release IMHO.

[terrytwn]

Yes, me too except for this annoying problem. does it have anything to do with the vendor profile which we should remove from the install?

[marcokchan]

I did not know how to read Chinese on Browser, please help, ie. "Set Encoding", which option do I need to choose??? Please advise. Thx!!!

[jeremy]

Newest OS now newer: http://www.blackberryforums.com/gene...ml#post1144299

[richbrowne]

Originally Posted by jeremy

Newest OS now newer: http://www.blackberryforums.com/gene...ml#post1144299

Hi. Has anyone tried this version yet please and if so, is it stable and what does it resolve?

Thanks,

Richard.

[Zhin]

Hi people,
I am looking for Bold 9000 OS which enable to Japanese read/write.
Is this OS version can be?
If some one already tried or have any information, it will be great appreciated !!

[TigerDX]

Edit: An older version of the OS from Telstra seems to work and allows Japanese input as it should. (v4.6.0.144) Who knows why newer versions don't show the Japanese input option even when it's installed?

I've installed this OS over my European one in order to be able to input and read Japanese. However, while this allows me to read Japanese, and localise the whole device in Japanese, I can never use the Japanese Romaji Input method.

Even the Chinese Pinyin input method appears when I tried installing that, just not the Japanese one...

Any suggestions anyone? Thanks.

[jakontil]

Originally Posted by tamazoid

I've updated to this when it came out... So far, I think this is the best one! I haven't come across any problems so far...

There isn't really anymore memory leak... Sometimes it even goes back up! And my battery actually last me more than a day!

hi,

what do you mean by "sometimes it even goes back !" ?

becoz on certain occassion, my Bold dies and i need to remove the battery before i can fire it up again

[leci82]

guys, im currently on v4.6.0.162. i was wondering what version should i upgrade it to? and is .162 the same as .292?

thx much

[bimmerd00d]

Originally Posted by leci82

guys, im currently on v4.6.0.162. i was wondering what version should i upgrade it to? and is .162 the same as .292?

thx much

Look at the top of the 9000 forum, ther's the newest 4.6.0.247 version. You are running a very very old version of the firmware.