[sgt-d]

i haven't seen a single tool out there that works as a gui and can add/remove/save modules, etc. like mcp can.

i am holding on beta 6 only because one of my beta testers is saying that he cant change input languages after os installation... but i suspect the exe that was installed might have been english only. time will tell. the mcp dropbox really is the best version, i just hate pushing out beta versions unless people really want the latest and greatest.

[sgt-d]

@killa9512 - probably choice.com - in your program files\jl_cmder folder, rename that choice.com to something else. then try your desktop shortcut again. or try mcp

[dmel]

I've tried to resettofactory to remove the IT policy several times on my Storm 9530 but it doesn't seem to work.

I'm not sure how to check to see if the policy is enabled once I come back from the reset, but when I install gmail it (1) asks me to set a key store passwd, which i do; (2) when it tells me the certificate is not trusted, I say "Trust certificate." I enter the key store passwd, it confirms that the application is requesting access to the Trusted Key Store. But when I say OK, it says "The certificate could not be added to the Trusted Key Store due to IT Policy restrictions." (see attached pic)

So, I'm assuming my attempt to delete the IT Policy didn't work

What are my options here? If I use JL_Cmder to wipe the blackberry clean and then install 4.7.0.103, is the IT Policy guaranteed to be gone?

[John Clark]

Wirelessly posted (BB 11020)

You can tell if the IT policy is gone by looking at the firewall. If it has a lock by it the policy is still there. If there is no lock and it can be disabled then the policy is gone.

[dmel]

Originally Posted by John Clark

Wirelessly posted (BB 11020)

You can tell if the IT policy is gone by looking at the firewall. If it has a lock by it the policy is still there. If there is no lock and it can be disabled then the policy is gone.

There's no lock, and the firewall is disabled, but I'm still getting the above msg about the IT Policy restrictions when attempting to trust certificates.... I'm confused.

[megs423]

Originally Posted by dmel

There's no lock, and the firewall is disabled, but I'm still getting the above msg about the IT Policy restrictions when attempting to trust certificates.... I'm confused.

I have the exact same issue. Did you end up finding a way to resolve this? Thanks.

[dmel]

Originally Posted by megs423

I have the exact same issue. Did you end up finding a way to resolve this? Thanks.

I ended up wiping the device with JL_Cmder then installing the leaked .103 OS version, and all's well now. Works like a charm.

[fraguelfire]

I´ve a question I have one BB model 8700G which never set a password, and since some days started up to ask for "NEW PASS" and I cannot manage using it since when direct start up ask for the pass, i try to enter any and always answers IT´s TOO SHORT so my question is if possible to reset the device into factory settings including this PASS reset for not to be asked again, I don´t know if it´s a bug or what, but very strange thing, I uploaded Firmware and different flashes but problem is still being present, Could anyone help me please?

lot of thanks in advance...

[John Clark]

Load OS 4.5 onto the device. Then follow "method 1" in the following post:

http://www.blackberryforums.com/gene...ve-policy.html

[jscjeff]

I have attempted to open the jl_cmdr several times. Each time a smaller black window flashes and goes away. Can't seem to get the file to open. Any suggestions?

[megs423]

Originally Posted by dmel

I ended up wiping the device with JL_Cmder then installing the leaked .103 OS version, and all's well now. Works like a charm.

Perfect! Worked for me also. Only, I did something dumb by restoring to an old back-up (so I could have my contacts, texts, etc) after the software upgrade. This brought the policy back and I had to start over. But it seems to be working now. Thanks again!

[nikkidefoster]

it has been over a month that i've tried fixing the problem, taking it to att stores, spending hours on the phone with CS, it all works now. thank you time a million!

[goldman1]

I have a problem...

after using JL Commander to wipe the device, the reload software 507 screen comes up, but when I open device manager the device is not detected...

what should I do?

[jsconyers]

This should help.

What to do next if Jl Cmder will not connect and wipe - BlackBerryFAQ

[ZJamin]

I am trying to reset factory settings on my 8707g but continuously getting an error, I have successfully used the program on my 8100 and 8130 and 8700.

I have tried a friends 8707g and i am getting the same error.
Please see attachment for screenie.

[John Clark]

Resettofactory command only works on devices with OS 4.3 or higher. It won't work on the 8707g since there is no OS 4.3 or higher for that device.

[ZJamin]

Originally Posted by John Clark

Resettofactory command only works on devices with OS 4.3 or higher. It won't work on the 8707g since there is no OS 4.3 or higher for that device.

Thanks, is there another way of disabling password apart from athe blank IT Policy method?


Regards

[rambler6]

My radio would not stay on unless I was in the Manage Connections screen. It had been auto shutting off periodically over the past week. This utility let me erase the device and reload the OS from scratch. So far it is working properly again!!!!

[ohad_129]

resettofactory - Removes the IT Policy from the device. (OS 4.3+ required
what happen to all my app and all other things in my device when im doing it
thx

[John Clark]

resettofactory will leave all your apps but will wipe all data from them. Be sure to make a backup first.