[Mobylo]

Dear Everyone,

We are pleased to inform that MultiAlarm 3.0 has been released. This version includes the most requested features and major internal performance enhancements.

Quick glance on Features:

• Five independent alarms
• Frequency - Daily, Mon-Fri, Sat-Sun, and a quick Once-off alarm.
• Custom frequency - set the alarm to fire on specific days of week only.
• Different Ringtones for different Alarms.
• Holidays - Set to Active or Silent on holidays.
• Pre-loaded list of holidays provide. Customise to your country's or company's official list.

Other useful features:

• Alarms can be named.
• Auto-power On (4.1 only)
• Application Icon Enabled on HomeSreen when Alarm is set. (4.1 only)
• Screen Backlight On

As mentioned before, we will be giving out Discount Coupons to everyone who have participated in the Preview Release and helped us perfect Mobylo! MultiAlarm.

Please note that the Preview Version will expire on Jan 20, 2007. If you have not registered for discounts yet, please do so before Jan 19th. Those who have registered need not do so again, your coupons will be there very shortly!

Thanks & Regards,

[[IFC]Area51]

Sweet and thanks for such wonderful program. Definitelly something im interested and willing to support 100%. KUDOS!

[Mobylo]

Thanks IFC Area51!
Interesting screen-name

[DeanQ]

Great product. I am buying it.

[c3po25]

I love the app, but I have a question. I have 2 bb's and if I purchase the software can I install on both or can I only install on one??

[Mobylo]

Dear c3po25,
One registration key of MultiAlarm will work on only that device whose PIN is mentioned during the purchase. So you will not be able to use it on more than one device. We recommend you to install in on the BB which you carry with you more often.

Thanks.

[adamlau]

Coupon received, nice discount, registered yesterday. Being able to set multiple alarms using multiple profile tones is what sets this app apart from ToDoMatrix alarms.

[Mobylo]

Thanks Adamlau. Support just forwarded us the feature suggestions made by you today. We are glad to say, it easily falls among some of the best feedbacks we have had here at Tech. We look forward to hear more of your thoughts / ideas!

Thanks!

[blakeatl]

MultiAlarm is looking good so far.

[MainStream]

I have found this program to be very useful. The support team at Mobylo are great to work with also. I had a couple of issues during the final installation and they were both very responsive and helpful.

[Mobylo]

Thank you MainStream. We are going to show your post to the Support! They will love it

[[IFC]Area51]

Originally Posted by Mobylo

Thanks IFC Area51!
Interesting screen-name

HAHA, thanks! Why is it interesting? hehe.

[[IFC]Area51]

Originally Posted by Mobylo

Thanks IFC Area51!
Interesting screen-name

HAHA, thanks! Why is it interesting? hehe.

[denness544]

I still haven't received a discount code yet. I have sent an email from the Mobylo alarm program and on your website.

[obijohn]

MultiAlarm 3.0 trial installation is broken when replacing the preview version 1.0.x (at least for me on my 7100). In fact, it is so broken that it is now impossible to uninstall MultiAlarm fully or even install any other version of MultiAlarm on my 7100. Let me explain further, perhaps someone can help.

Like everyone else using the preview version (1.0.something?), on the 20th we got a message saying the preview was expired. So I went to m.mobylo.com on my device's browser and downloaded the trial version of 3.0 OTA (after selecting the appropriate OS version, 4.1 in my case). After selecting "Download", I was asked by my device if I wanted to replace the existing version, which I did. After downloading, I was prompted to restart my device. After restart, there were now 2 icons for MultiAlarm so I assumed that the 1.0.x version was not uninstalled properly when 3.0 was installed (the text under each did not indicate which icon represented which version).

Selecting one icon would lock up my device for about 20 seconds, but other than that nothing would happen (i.e., no error messages or anything else -- literally nothing would happen except that my device was unresponsive for about 20 seconds). Selecting the other icon would result in an error message:

Error starting MultiAlarm41: Class 'com.mobylo.blackberry.alarm.AlarmSettings' multiply defined

Well, I figured the problem was that I didn't fully uninstall the preview version before updating to the new version. So I went to Options->Advanced->Applications to uninstall MultiAlarm. In the list, only the new version was present, even though my device clearly shows 2 MultiAlarm icons. Not having any other choice, I selected to uninstall version 3.0.41.4. I was then told that my device would have to be restarted to complete the removal, so I clicked OK and my device restarted.

However, there is now still a MultiAlarm icon present (!), which I presume is the preview version, but going into the Applications list again does not show MultiAlarm at all. Connecting the device to Desktop Manager and pulling up Application Loader also does not list MultiAlarm. Now when the icon is selected on the device I get this error message:

Error starting MultiAlarm: Module 'HolidaySettings' not found.

So I tried to re-install version 3.0. However, the situation is the same: I still have 2 icons, and the first error message is still displayed when one is selected and the device temporarily freezes when the other is selected, and still only 1 MultiAlarm version is listed so I can't uninstall it fully.

I'm sure the problem was that I didn't properly uninstall the preview version first, but at this point I just want to clean my device of the thing. Any help would be appreciated.

[adamlau]

Try removing the "MultiAlarmxx" module (where xx is the version number installed) from: Options > Advanced > Applications > Modules

[Mobylo]

Dear Obijohn,

This is because, as you said, the previous version of MultiAlarm was not uninstalled from your device before you installed the new version. The answer is this -

1. Download a utility that we have written specifically for this issue; installing version 3.0 over version 2.0 on 4.1 OS! Download this utility OTA from http://m.mobylo.com/w.php
2. Launch this utility - it shows you both the version of MultiAlarm installed on the device and HolidaySettings if any.
3. Select each one-by-one and click on Delete. (The Modules will be deleted, although the list is not refreshed.)
4. Reset your Device.

Now you can install version 3.0 afresh!
OTA: http://m.mobylo.com
Desktop: http://www.mobylo.com

Also, it is requested that in case of any issues please remember to contact They are informed, equipped and eager to answer all issues.

Thanks!

[Mobylo]

Originally Posted by denness544

I still haven't received a discount code yet. I have sent an email from the Mobylo alarm program and on your website.

Dear denness544,

This could be due to a few reasons;
1. Discount codes for the day are sent out the next day.
2. Sometimes if we have more than one email ids for someone, it is possible that discount was mailed only to one of those emails.
3. Also, please remember to check your Bulk folders because some spam filters may filter your code out as spam and put it in your Bulk folders!

Thanks!

[obijohn]

Originally Posted by Mobylo

Download a utility that we have written specifically for this issue

So let me get this straight. A second product had to be written to fix the installation problems caused by the new version? I'm not trying to be rude, but I've had my device for 2.5 years and this is the first time I've ever seen something like this. Shouldn't the new version be able to detect the previous version and clean up after itself without the user having to manually uninstall the previous version first?

[Mobylo]

Dear Obijohn,

In short the answer to your question is Yes.

This issue occurs on certain builds of 4.1 OS. Because of the way installation & uninstallation data is maintained by the OS, sometimes partial uninstallation can happen. Then you have to do things like going to Modules & deleting it one by one, resetting the device etc. The utility intends to save the user from having to do all this. That is why it is recommended that this utility be used in case you get these errors on 4.1.

If there are any issues please feel free to ask; we will be glad to assist you.

Thanks.