When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:
-Input Voltage :220V
-Output Voltage :208-240VAC ( analogous to Input Voltage )
-Input Frequency :48-63 Hz
-Output Frequency :0-400 Hz
-Input Phase :1 or 3 phase as you like
-Output Phase :3 phase
-Control Mode :SPWM
-Input Power :220V class:220±15%
-Working Temperature :-10~40 ℃
-Humidity :0-95% Relative Humidity (without dew)
-Vibration :Below way】Input:220VAC(+/-5%) 1 or 3phase(for single-phase input, just connect the input wire to the R and S terminals) Output:3phase 220v. Frequency:0-50hz/60hz. 0-400hz
【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting
【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
How To Install This VFD
Symbol:Function Description
R.S.T:Input terminal of AC line power.(220V class for single phase, single phase connected to any two phases)
U.V.W:Output terminal of the inverter
P+.PR:Connector for braking resistor.
E:Ground terminal: the third method of grounding for 220V.
Frequency 0.1%(-10~40℃); Analog: 0.1% (25±10℃)
Setting Resolution:Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency
Output Resolution:0.1Hz
Operator Setting Method:Press directly ←∧∨ to set.
Analog Setting Method:External Voltage Functions:Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
General Control
Ramp Control:Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
Torque Control:Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
Multi-Inputs:6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Multi-Outputs:5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
Other Functions:Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Protection Functions
Overload Protection:Electronic relay protection motor drive.Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.)
Fuse Protection:When the fuse breaks , the motor will stop.
Over-voltage 220V class:DC Voltage >400V.
Under-voltage 220V class:DC Voltage <200V.
Restart After Instant Stop:Restart with Frequency Track after Instant Stop
Stall Protection:Stall protection in ramp operation
Output Short Circuit:Electrical circuit protection
Other Functions:Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
Package Include:
1*Single To 3 Phase 7.5KW 10HP 220V Variable Frequency Drive Inverter CNC VFD
W/ Product You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase.
-Please Allow 1-3CM Differs Due To Manual Measurement.
-Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding.
This is Labwork. We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!
Payment Shipping Returns Before leaving us neutral or negative response, please contact us first.If you have problem, please do not hesitate to contact us by message. We will respone ASAP.
We appreciate response from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave response. Customer service is very important to us , hope you can enjoy our store.
Description:
-Input Voltage :220V
-Output Voltage :208-240VAC ( analogous to Input Voltage )
-Input Frequency :48-63 Hz
-Output Frequency :0-400 Hz
-Input Phase :1 or 3 phase as you like
-Output Phase :3 phase
-Control Mode :SPWM
-Input Power :220V class:220±15%
-Working Temperature :-10~40 ℃
-Humidity :0-95% Relative Humidity (without dew)
-Vibration :Below way】Input:220VAC(+/-5%) 1 or 3phase(for single-phase input, just connect the input wire to the R and S terminals) Output:3phase 220v. Frequency:0-50hz/60hz. 0-400hz
【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting
【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
How To Install This VFD
Symbol:Function Description
R.S.T:Input terminal of AC line power.(220V class for single phase, single phase connected to any two phases)
U.V.W:Output terminal of the inverter
P+.PR:Connector for braking resistor.
E:Ground terminal: the third method of grounding for 220V.
Frequency 0.1%(-10~40℃); Analog: 0.1% (25±10℃)
Setting Resolution:Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency
Output Resolution:0.1Hz
Operator Setting Method:Press directly ←∧∨ to set.
Analog Setting Method:External Voltage Functions:Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
General Control
Ramp Control:Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
Torque Control:Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
Multi-Inputs:6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Multi-Outputs:5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
Other Functions:Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Protection Functions
Overload Protection:Electronic relay protection motor drive.Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.)
Fuse Protection:When the fuse breaks , the motor will stop.
Over-voltage 220V class:DC Voltage >400V.
Under-voltage 220V class:DC Voltage <200V.
Restart After Instant Stop:Restart with Frequency Track after Instant Stop
Stall Protection:Stall protection in ramp operation
Output Short Circuit:Electrical circuit protection
Other Functions:Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
Package Include:
1*Single To 3 Phase 7.5KW 10HP 220V Variable Frequency Drive Inverter CNC VFD
W/ Product You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase.
-Please Allow 1-3CM Differs Due To Manual Measurement.
-Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding.
This is Labwork. We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!
Before leaving us neutral or negative response, please contact us first.If you have problem, please do not hesitate to contact us by message. We will respone ASAP.
We appreciate response from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave response. Customer service is very important to us , hope you can enjoy our store.
Copyright @ 2015 tyllq. All right reserved.
Labwork 1 Spool 11Gpm Hydraulic Directional Control Valve Double Acting Valve
$48.28
Labwork 1 To 3 Phase 7.5KW 10HP 220V Variable Frequency Drive Inverter VFD VSD
$159.50
Labwork 1/2HP 56C 1750RPM General Purpose Electric Motor Single Phase TEFC 60Hz
$142.02
Popular Forums