[philbogle]

Thanks to the help of a number of BlackberryForums users, there is now a solution in v3.86 to the problems that some users were having with server-based autocomplete.

If the default network settings in Berry411 aren't working for you, you should download version 3.86 (http://thebogles.com/berry411.jad ), set the connection type to "Direct" under "Edit Settings..." in Berry411, and ensure that your TCP setting include the correct carrier APN as described at:

http://www.blackberryforums.com/blac...ip-no-bes.html

3.86 also falls back on local autocomplete with a smaller dictionary even if the server is inaccessible.

[aiharkness]

Wirelessly posted (8700g: BlackBerry8700/4.1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/100)

Phil, Thanks.

[digidep]

Originally Posted by philbogle

Thanks to the help of a number of BlackberryForums users, there is now a solution in v3.86 to the problems that some users were having with server-based autocomplete.

If the default network settings in Berry411 aren't working for you, you should download version 3.86 (http://thebogles.com/berry411.jad ), set the connection type to "Direct" under "Edit Settings..." in Berry411, and ensure that your TCP setting include the correct carrier APN as described at:

http://www.blackberryforums.com/blac...ip-no-bes.html

3.86 also falls back on local autocomplete with a smaller dictionary even if the server is inaccessible.

Phil,

I am on a BES and can't seem to get any autocomplete (server or local) on 3.86 (or anything since 3.6). Also, i notice that the setting for the advanced network setting doesn't remember what the last setting was. And yes, i have enabled all http connections for the Berry411.

BerrySearch does however work just fine for me. I have a 8100 (suretype), so most of the time it trys, then has to try again based on what i'm typing, but always returns results for the autocomplete.

I have tried about every setting possible, set my APN, tried Default, Direct, BES, no luck. Data arrows go crazy, but no autocomplete.

I haven't had any issues with any other applications that access the network connection. BBWeather, TeleNav, Gmail, GoogleMaps, BBMaps, QuickPlayer, Magic Games, etc...

Any ideas for us on the BES?

digidep

[aiharkness]

Wirelessly posted (8700g: BlackBerry8700/4.1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/100)

I've noticed, too, that the direct radio button is not blackened when I go back to play with addresses, sometimes. But autocomplete does continue to work for me after initially selecting direct and saving.

[pengrus]

Originally Posted by philbogle

Thanks to the help of a number of BlackberryForums users, there is now a solution in v3.86 to the problems that some users were having with server-based autocomplete.

If the default network settings in Berry411 aren't working for you, you should download version 3.86 (http://thebogles.com/berry411.jad ), set the connection type to "Direct" under "Edit Settings..." in Berry411, and ensure that your TCP setting include the correct carrier APN as described at:

http://www.blackberryforums.com/blac...ip-no-bes.html

3.86 also falls back on local autocomplete with a smaller dictionary even if the server is inaccessible.

Thanks following the two steps including APN worked.

[philbogle]

The radio button display bug is fixed in a new point version 3.87; I think this was purely a display issue.

[pengrus]

Originally Posted by philbogle

The radio button display bug is fixed in a new point version 3.87; I think this was purely a display issue.

what radio button?

[aiharkness]

Originally Posted by pengrus

what radio button?

Those are the little circles which you "check" to select connection type.

[mgerbasio]

No luck here either with Cingular using the wap.cingulargprs apn. Running v3.86 and using Direct for communications

[deficitism]

Sweet! This worked for me on direct mode!!!

One thing I would like to point out though... It's a bit touchy.
Example: If I begin typing in a word, autocomplete will begin working, but if I backspace to type in something else, autocomplete gives up and does not offer suggestions on the second word... If that makes any sense. Other than that, this rocks!!!!