BlackBerry Forums Support Community

Dawg · 11-30-2006, 09:16 AM

did you remove the vender xml from the rim folder first?

SNOWSTOLKER · 11-30-2006, 12:38 PM

JL_Cmder v1.8.3
BB 8707v - wipe
BLACKBERRY
* * * * N O T I C E * * * *
You Are About To Completely
Erase A BlackBerry
To Continue Type
blackberry
WHAT TO DO(MAKE) FURTHER?

snowskier79 · 11-30-2006, 12:39 PM

Quote:

Originally Posted by SNOWSTOLKER

JL_Cmder v1.8.3
BB 8707v - wipe
BLACKBERRY
* * * * N O T I C E * * * *
You Are About To Completely
Erase A BlackBerry
To Continue Type
blackberry
WHAT TO DO(MAKE) FURTHER?

Type blackberry and hit enter if you want to erase everything on your BB.

terrytwn · 12-17-2006, 01:57 AM

Ran JL_Cmder once without any problems but when I tried to run it again, after the start-up screen and when I pushed "any key" to run the program, I end up getting a blank screen.

What is wrong and how can I fix this?

John Clark · 12-17-2006, 02:17 AM

I would just uninstall it and then reinstall it. I use JL_CMDER all the time with no problems.

terrytwn · 12-17-2006, 05:40 AM

strange. been doing this all afternoon and got it to work only once. Now with repeatedly attempts, I cannot get JL-Cmder to work, just a black screen with JL_Cmder v1.8.3 on the menu bar.

Any ideas?

d_fisher · 12-17-2006, 05:21 PM

Try launching the batch file directly. Go to C:\Program Files\JL_Cmder and double click on JL_Cmder.cmd directly. Also check that there are four files in the directory (JL_Cmder.cmd, JL_Cmder.ico, JavaLoader.exe, and choice.com).

jrtonite · 12-29-2006, 12:52 PM

i wiped my blackberry so how do i install the os and where do i get os downloads

d_fisher · 12-29-2006, 01:52 PM

Quote:

Originally Posted by jrtonite

i wiped my blackberry so how do i install the os and where do i get os downloads

See THIS post for download locations and install instructions.

genxguy · 01-04-2007, 03:16 PM

Hi, I followed your instructions as closely as possible.
When I type javaloader -u wipe, I am getting an 'unable to open port' message no matter what I try. I'm using the USB port directly on the laptop, it's powering the BB, and the BB Desktop software is detecting the device. So I don't think the port OR the cable is bad. I tried other cables, same thing.

I also tried running jl_cmder, and typed blackberry to confirm wipe. When I do that, a red screen flashes for an instant then goes back to the menu screen. No other result.

Thanks for any help.

I'm using the Nextel 7100i, if that makes any difference.

d_fisher · 01-04-2007, 04:28 PM

Make sure that BlackBerry Desktop Manager is not already accessing the device. I would recommend that you close the Desktop Manager and Device Manager (if running) before trying to run any command line to the device.

John Clark · 01-04-2007, 04:29 PM

Make sure Desktop Manager is NOT running while using javaloader or JL_CMDER. That could be the problem...

ew1sw21 · 01-10-2007, 10:21 PM

Hi doug et al...
I loaded your JL CMDER and when I open it up (desktop or from programs listing) i'm getting this error:,

"C:\PROGRA~1\Symantec\S32EVNT1.DLL. An installable virtual device driver failed DLL initialization."

But I'm still able to get a screen shot and look at the event logs and such. any ideas? or is it all good? I'm a total noob here and just trying to get smarter on the whole thing. Thx.

d_fisher · 01-11-2007, 12:10 AM

Quote:

Originally Posted by ew1sw21

Hi doug et al...
I loaded your JL CMDER and when I open it up (desktop or from programs listing) i'm getting this error:,

"C:\PROGRA~1\Symantec\S32EVNT1.DLL. An installable virtual device driver failed DLL initialization."

But I'm still able to get a screen shot and look at the event logs and such. any ideas? or is it all good? I'm a total noob here and just trying to get smarter on the whole thing. Thx.

Sounds like JL_Cmder is working just fine. The error sounds like it has somehting to do with Symantic (or Norton) anti-virus. Is your anti virus program working properly? I can assure you that JL_Cmder is not a virus. It is a simple batch file. I would guess that Symantic is trying to scan the files on execution and experiencing a problem somewhere along the way.

ew1sw21 · 01-11-2007, 08:04 AM

thanks for the info.

djjt · 01-11-2007, 11:31 PM

Quote:

Originally Posted by BobbyWhite

Using what was tried in another thread, I removed rim7520p.bin from the SW folder, and was able to install everything but Radio. (no phone or charging)

Same on both phones.. HELP!!! Please?

Bobby

hi bobby,

i just had the same problem today. i tried to upgrade it at my work computer and it would stop at "load radio software"

i went home with frustration and said to myself to try it again on my home computer... i don't have any blackberry software installed at all. no desktop manager... i downloaded the application loader with the latest OS and the install to the phone went smooth... it might have to do with cleaning out the vendor file and having a clean proper install and uninstall with that desktop manager, there's a post on that in the forums

the phone took a while to boot... had to call nextel to change pins and IMEI's and get service books... but otherwise done

phrider · 02-06-2007, 01:50 PM

Thank you d_fisher!!

You saved (I think) my T-Mobile 7290. I got a JVM 102 error, and had to successfully wipe/nuke to reload.

Now, if I'd only remembered to back up more often....

ZetallicA · 02-14-2007, 11:46 PM

****Thanks To F_Fisher ****

How To ReInstall the BlackBerry 8700g OS :

Requirements :
* Java Loader Command : JL_Cmder v1.8.3.zip
* Handled OS Software (usually from your carrier Such Tmobile)
* Desktop manager
-----------------

- Run the Java Loader and choose the wipe option (number 4)
- install the Handled OS and then Upload it .

Voila .
after I erase I got the screenshot , and I got scared that I cannot to install the Handled OS , but Its was possible ,just a little "loading" time and the worked fine .

mavsx · 03-14-2007, 10:16 AM

duuuude!, d_fisher that program is money! thanks so much, nice work. You are the man.

anwer38 · 03-25-2007, 02:31 PM

Hello .. .. please help mee .. .. !!
Guys, i loaded an alx file, (something.alx) into my BB 7290, using the USB and Desktop manager and after the automatic reset, it shows the HOUR GLASS for some time and then resets again or gets stuck, but never shows the home screen, I reset it (got the battery out and put it back in) but no use .. .. since it doesnt turn ON, it doesnt connect with the desktop manager too. Please tell me wut to do .. .. please .. .. !!

I used the JL Loader and wiped the set, (chose the wipe option in the JL Loader console) but the same thing happens again !!

Pleez help me, i live at a place where no body even understands BB .. .. !!